Why Do My AirPods Keep Disconnecting? Find Out and Solve the Problem in 2023!

Apple products are often held up as examples of user-friendly innovation. This is why consumers are prepared to pay Apple’s inflated prices compared to those of its rivals, making any malfunctions all the more infuriating.

The question “Why do my AirPods keep disconnecting?” has been answered. The causes and solutions to this problem will be discussed below.

Problem Solved: My AirPods Keep Losing Connection.

If your AirPods randomly stop connecting, here are some potential causes and solutions:

1. Verify the Battery

If your AirPods Pro constantly losing connection, low battery life could be at blame due to their wireless nature. When the battery life of your AirPods becomes too low, they may stop connecting to your devices.

Make sure your AirPods have enough juice before trying any other solutions to eliminate this likely cause.

Keep your AirPods’ battery between 20 and 80 percent and see whether the disconnects persist.
To see how much juice your AirPods have left, follow these steps on an iOS device:
Pull the AirPods out of their case and bring them closer to your phone or computer.
A few moments later, the remaining battery life will be displayed.
The widget and status light can also be used to check the AirPods’ battery life.

2. Improve Bluetooth Connection Stability

Sometimes, even when the AirPods’ battery is completely charged, they won’t stay connected to your iPhone. This could be the result of an unreliable Bluetooth connection.

AirPods pair with your electronics via Bluetooth. Solid objects, such as walls, doors, and even your own body, might cause Bluetooth to malfunction. Your own body, for example, could produce interference.

Bluetooth can be disrupted by the radio frequencies of other wireless devices, including your WiFi. When more obstacles are placed between your device and your AirPods, the effective range will decrease. To see if this is the case, try turning on other nearby wireless devices and bringing your AirPods closer to the audio source.

3. Clean the AirPods

Bluetooth interference caused by excessive wax buildup, grime, or moisture might also cause your AirPods to randomly disconnect from your device.

The AirPods may be cleaned with 70% isopropyl alcohol, a cotton swab, and a lint-free cloth as shown below.

Use a lint-free cloth to wipe down the exterior of your AirPods.
Use the cotton swab to get into the cracks and crevices that the cloth missed.
To sweep away the dust and grime, try using a dry, gentle toothbrush.
After that, wipe everything down with an alcohol-soaked lint-free towel.
Since AirPods are so fragile, it’s important to clean them carefully without using too much effort in case you crack the casing.

4. Bluetooth Reset

The Bluetooth settings may have been altered, causing your AirPods Pro to constantly disconnect. If you have any questions or encounter any difficulties, you can return your iPhone, iPod touch, or iPad’s Bluetooth settings to their factory defaults.

To turn off Bluetooth on your gadget, follow these steps:

Access the Settings menu on your iOS device.
Select the “Bluetooth” menu item.
Disable Bluetooth.
Turn it back on after a brief pause.

There should no longer be any Bluetooth connection issues with your AirPods due to software issues.

For iOS, You May Also Use the Clear Bluetooth Cache Option. the Procedure Is as Follows:

Access the Settings menu on your iOS device.
Select the “Bluetooth” menu item.
An “i” symbol appears on the linked gadgets here. Tap the button.
Select the option to “Forget This Device.”
There will be a new window open up. Choose the Accept option.
To unpair all your gadgets, just follow these instructions again.
Simply reboot the machine.
The AirPods need to be reconnected to the gadget.

5. Reset your AirPods

If one of your AirPods continues falling out of sync with your device, the problem may lie in its firmware.

When you reset your AirPods, they will forget all of the devices you’ve ever linked them with. This will merely reset the smartphone so that it must be paired with the AirPods for the first time.

Follow these steps to reset your AirPods:

Get into the settings of your iOS device.
Choose Bluetooth, then tap the info button next to your AirPods in the list of connected devices on the right.
Select the option to “Forget This Device.”
Make sure your AirPods are completely charged.
Open the AirPods case once the headphones have finished charging and are ready to use.
For the next twenty seconds, please press the case’s Setup button.
Your AirPods are now factory reset when the white LED indicator begins blinking amber.

6. Reset iOS’s Network Settings

The network settings on your iOS device are where you’ll maintain information about your preferred networks, as well as WiFi, VPN, and Bluetooth configurations. If you’re wondering,

“Why do my AirPod pro keep disconnecting?” the issue may lie with your network configuration.

If the network configuration is reset, all saved data pertaining to the aforementioned connections will be deleted. Resetting the network settings to their factory defaults should fix the AirPods connectivity problem.

Here’s how To Wipe Your iPhone’s Network:

Access the Settings menu on your iOS device.
Select the “General” menu item.
Select the Move or Clear button.
Pick the choice to “Reset.”
A new screen will open up. Select the option to Reset Network Settings.

Get in there and use your iPhone’s passcode. A complete network reset will result from that action.

7. Disable the Ear Detection

There are sensors included inside each AirPod that can tell if it is being utilized or not. If the sensor has trouble telling if it’s in the ear or not, it will drop the connection and save power. A slight repositioning of the body can set off the Ear Detection and cause the connection to break.

Here’s how To Turn Off Ear Detection on An iPhone or iPad:

Connect your two AirPods and put them on simultaneously.
Get inside the iPhone‘s configurations.
If Bluetooth is available, select it.
To access more settings for your linked AirPods, use the i button.
Mute the Ear Tracking System’s auto feature. The situation where your AirPods disconnect frequently should now be resolved.

8. Deactivate Automated Switching

A Multi-Phase IOS The AirPods may switch between different devices within the same iCloud using Bluetooth, which is also known as automatic switching.

If your AirPods pro keep coming unpaired, this could be a contributing factor.

When you have two iOS devices connected, AirPods will automatically switch to the active device as the sound source.

Here’s how to disable the automatic switch:

Put on your AirPods and sync them with your iPhone or iPad.
Access the settings menu on your gadget.
Choose the Bluetooth menu item.
To access more settings for your paired AirPods, tap the info symbol on the right side of the headphones.
Select the option that reads “Connect to this iPhone.”
Select the option labeled Since This iPhone Was Last Connected.

9. Upgrade your iOS device

If your iOS is out of current, you may have problems that have been fixed in more recent updates. There could be a technical problem with your AirPods or your smartphone. If you’re wondering,

“Why do my AirPods keep disconnecting with a full battery?” it’s likely not the AirPods themselves, but rather your device. If your AirPods won’t pair, check to see if you’re using the latest recent version of iOS.

Here’s how to perform an iOS update:

If you don’t want to lose anything, back up your device.
Make sure your iOS device has a full charge and is linked to WiFi.
Launch the device’s configuration menu.
Select the “General” menu item.
Select the Update Software menu item.
See if an update is required.
Select the Get and Setup button.

To enable automatic updates, head to the Settings menu, select General, click Software Update, and then select Automatic Update. By keeping your device up to date, you reduce the risk of experiencing the AirPods disconnecting problem again.

10. Update Your Air Pods Firmware

AirPods use the same iOS–like operating system as your iPhone. This enables them to carry out the computations essential for functions like automatic switching, ANC, and ear detection.

If your AirPods keep going missing, this may be the answer to why they’re malfunctioning due to bugs.

When paired with an iOS device, the AirPods’ firmware should update immediately. But here’s how to see what firmware version your AirPods are running:

Pair the AirPods with your iPhone or iPad.
Navigate to the Settings menu on your iOS device.
Select the “Bluetooth” menu item.
Select the “i” icon that appears on the right side of your linked AirPods.
Verify the firmware version in the Version column.